Technical Data
Height:
|
individual (min. 45cm, max. 210cm) |
| Width: |
individual (min. 45cm, max. 210cm) |
| Thickness: |
30 mm |
| Connections: |
2* 3/4" external thread (connections at the back) |
| |
2* 1/2" internal thread (connections at buttom) |
| Power: |
680 Watt / square-metre (70/55/20°C)
(forward-flow-/ back-flow-/ room-temperarture) |
| max. working pressure: |
6 bar max. |
| max. working temperature: |
80 °C |
| DIN-Certificate |
|
| |
Register-Nr.
6R1120 |
DIN EN 442-1
DIN EN 442-2
DIN EN 442-3 |
The functional and manufacturing principle of tibutherm-heatings is protected at the German patent-office with the registration-number 202005001992.5 .
Back of the radiator
tibutherm-radiators are installable like every other radiator.
If the dimension of the radiator is known, you can preinstall the connections by using the gauges noted below.
The position of the brackets can not be specified before you receive the radiator. It depends on the size of the radiator and the position of the pipes inside. So this dimensions have to be measured on the finished radiator.
Mounting support are included with delivery.
Connections at the back:
Connections at the bottom:
tibutherm-radiators are fixed with sockets. They were adjusted with a spacer parallel to the wall. If you have a radiator with connections at the back, an electrical-thermostat and a valve must be installed. It is also recommended to install a valve in the back flow for blocking and deflation.
To run more radiators with connections at the back, we recommend that you use a connection block.
Radiators with connections at the bottom are installed with a thermostat-valve or a valve-set. The deflation is to be done through the back-flow screw-joint.
- tibutherm-radiators don't need a extra deflation
The pipes inside the stone are so small, that air-bubbles are carried away by the water.
- For detailed informations look at our installation-description at the download area. more info
